The document your auditor will pull first.
Switch tabs to see one of four deliverables — a PM procedure, a LOTO card, a weekly safety talk, and the live AI chat answering a floor question from the same library. Click any tab to preview it.
Preventive Maintenance · Hydraulic Press H-200
- Frequency
- Every 500 hrs / 30 days
- Est. downtime
- 22 minutes
- Trade
- Maintenance Tech II
- PPE
- Cut-A gloves, safety glasses, steel toe
1. Lock out / tag out per LOT-014 (hydraulic + electrical isolation).
2. Verify zero pressure on accumulator; bleed to ≤2 psi.
3. Inspect ram seals for extrusion; replace if measured gap > 1.2 mm.
4. Sample hydraulic fluid; if particle count > ISO 18/16/13, schedule flush.
5. Cycle press three times at 30% tonnage; log pressure trace on Sheet 24.B.
Find the right safety documentation for your plant.
Explore the same practical, revision-ready approach across the industries Helmsmith supports.
Practical guidance for keeping the program current.
Short, field-tested notes for the review cadence, maintenance records, and written procedures that make safety documentation hold up in practice.
Stop inheriting the last welder’s laminated hot-work card.
Get a 1910.147 lockout/tagout procedure on every energy source behind the welders, plasma table, grinders, press brake, ironworker, fume extractor, and bridge crane; a 1910.215 abrasive-wheel SOP with the bench-grinder ring-test cadence your shop actually follows; an AWS Z49.1 WPS / 1910.252 hot-work permit SOP that cross-cites your LOTO library; a press-brake + ironworker operator certification matrix; a per-welder authorization matrix (MIG / TIG / stick / plasma) by process and base metal; and an OSHA 300 with the welding-flash / burn entries an auditor opens first. The program sits next to your machine shop documentation, your forklift program, and your food & beverage plant documentation under one revision log, with every procedure cross-cited by tag — and back to your OSHA written-procedure library.