Disclaimer
Helmsmith provides safety documentation, maintenance procedures, training materials, and AI-assisted tools intended to help organizations organize and manage their safety programs. Helmsmith's materials are not a substitute for professional safety, legal, engineering, or regulatory advice and do not guarantee compliance with OSHA or any other applicable law, regulation, standard, or requirement.
Documentation and recommendations provided by Helmsmith, including AI-assisted content, should be reviewed, verified, and approved by qualified personnel familiar with the customer's facility, equipment, processes, and applicable requirements before implementation.
The customer is ultimately responsible for identifying and controlling workplace hazards, maintaining appropriate safety procedures, providing required training, and ensuring compliance with applicable laws and regulations.
The document your auditor will pull first.
Switch tabs to see one of four deliverables — a PM procedure, a LOTO card, a weekly safety talk, and the live AI chat answering a floor question from the same library. Click any tab to preview it.
Preventive Maintenance · Hydraulic Press H-200
- Frequency
- Every 500 hrs / 30 days
- Est. downtime
- 22 minutes
- Trade
- Maintenance Tech II
- PPE
- Cut-A gloves, safety glasses, steel toe
1. Lock out / tag out per LOT-014 (hydraulic + electrical isolation).
2. Verify zero pressure on accumulator; bleed to ≤2 psi.
3. Inspect ram seals for extrusion; replace if measured gap > 1.2 mm.
4. Sample hydraulic fluid; if particle count > ISO 18/16/13, schedule flush.
5. Cycle press three times at 30% tonnage; log pressure trace on Sheet 24.B.